Transfer switches and home panels for power stations (2026)

A power station runs your house circuits only through a panel or transfer switch that first disconnects the house from the grid, so the battery can't push power back onto the utility lines. Most are made for one maker's batteries, so start with the battery you have. Here's what each one pairs with, how many circuits it handles, and what the maker says about installation. The batteries themselves are on our whole-home battery backup and home backup battery comparisons; switches for gas generators have their own page.

By Tom Calder · Updated November 9, 2026 · 14 products, 10 of 14 price-tracked

Our picks

Best automatic panel 4.5

Switches over on its own in milliseconds

Photo: Amazon

EcoFlow Smart Home Panel 3

Smart panel with automatic switchover (under 20 ms) · 32 · 200A max (160A continuous), 120/240V · DELTA Pro Ultra X; DELTA Pro Ultra through the Smart Inlet Box. Not DELTA Pro 3 · EcoFlow-authorized installer who is a licensed electrician (EcoFlow)

Whole-house control for EcoFlow's DELTA Pro Ultra X

Researched

$3,299 at Amazon

as of Nov 9, 2026, 11:40 AM ET · Details

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

In stock

Check price →

Best manual switch or kit 4.0

Flip the circuits over by hand

Photo: Amazon

Anker SOLIX Smart Inlet Box

Manual inlet box for the E10 · Feeds your backup sub-panel (count not stated) · 100A continuous, 120/240V · Anker SOLIX E10 · Qualified personnel (Anker's guide); a licensed electrician may need the utility to remove the meter seal

The lower-cost way to hook up an E10

Researched

$399.17 at Amazon

as of Nov 9, 2026, 11:40 AM ET · Details

In stock

Check price →

All 14 compared

Show

Panel	What it is	Circuits	Rating	Works with (maker)	Who installs it	Price
1. EcoFlow Smart Home Panel 3 (32 Circuits) Best automatic panel Smart panel with automatic switchover (under 20 ms) · 32 · 200A max (160A continuous), 120/240V · DELTA Pro Ultra X; DELTA Pro Ultra through the Smart Inlet Box. Not DELTA Pro 3 · EcoFlow-authorized installer who is a licensed electrician (EcoFlow) Whole-house control for EcoFlow's DELTA Pro Ultra X 4.5	Smart panel with automatic switchover (under 20 ms)	32	200A max (160A continuous), 120/240V	DELTA Pro Ultra X; DELTA Pro Ultra through the Smart Inlet Box. Not DELTA Pro 3	EcoFlow-authorized installer who is a licensed electrician (EcoFlow)	$3,299 at Amazon as of Nov 9, 2026, 11:40 AM ET · Details Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. In stockCheck price →
Our verdict Our verdictResearched EcoFlow's main home panel: 32 circuits you can switch and monitor from the app, rated 200 A maximum, switching from grid to battery in under 20 ms. It works with the DELTA Pro Ultra X, and the older DELTA Pro Ultra through EcoFlow's Smart Inlet Box, but not the DELTA Pro 3. EcoFlow says it must be installed by its authorized installers, who are licensed electricians. Best for Whole-house control for EcoFlow's DELTA Pro Ultra X Good 32 app-controlled circuits Under 20 ms switchover (maker) 10-year warranty Worth knowing Works only with DELTA Pro Ultra and Ultra X 88.8 lb panel; needs professional installation Who shouldn't buy it: Don't buy it if you own a different brand's battery, or a DELTA Pro 3.
2. Anker SOLIX Power Dock (200A Automatic Transfer Switch for E10) Automatic transfer switch and combiner box (20 ms or less) · 12 smart circuits · 200A, 120/240V · Anker SOLIX E10 only, up to three units · Qualified professionals (Anker's installer guide) Automatic whole-home switchover for the Anker E10 4.5	Automatic transfer switch and combiner box (20 ms or less)	12 smart circuits	200A, 120/240V	Anker SOLIX E10 only, up to three units	Qualified professionals (Anker's installer guide)	$1,999 at Amazon as of Nov 9, 2026, 11:40 AM ET · Details Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. In stockCheck price →
Our verdict Our verdictResearched The automatic hub for Anker's E10: a 200 A transfer switch and combiner box that moves the whole house to battery in 20 ms or less, manages 12 circuits, and takes up to three E10 units. Anker's installer guide says installation must be performed by qualified professionals. Best for Automatic whole-home switchover for the Anker E10 Good 200 A whole-home backup 12 smart circuits 10-year warranty Worth knowing Works only with the E10 Professional installation Who shouldn't buy it: Don't buy it if you don't have, or plan to buy, an Anker E10.
3. Jackery Smart Transfer Switch Smart automatic transfer switch (20 ms or less) · 12 at 120V, or 6 at 240V · 100A grid / 60A power station, 120/240V · Jackery Explorer 5000 Plus and HomePower 3600 Pro Max (not the 3600 Plus) · Professional electrician (Jackery) Automatic backup for Jackery's 240V stations 4.5	Smart automatic transfer switch (20 ms or less)	12 at 120V, or 6 at 240V	100A grid / 60A power station, 120/240V	Jackery Explorer 5000 Plus and HomePower 3600 Pro Max (not the 3600 Plus)	Professional electrician (Jackery)	Check price →
Our verdict Our verdictResearched Jackery's automatic switch: up to 12 circuits at 120V or 6 at 240V, switching to the battery within 20 ms, for the Explorer 5000 Plus and HomePower 3600 Pro Max. Jackery says professional electricians must handle the installation. Best for Automatic backup for Jackery's 240V stations Good Automatic, 20 ms or less 12 circuits at 120V or 6 at 240V Handles 120V and 240V circuits Worth knowing Not for the HomePower 3600 Plus Indoor (NEMA 1) enclosure Who shouldn't buy it: Don't buy it if you have a 3600 Plus: Jackery's 120V manual switch is the one for it.
4. BLUETTI Apex 300 Home Integration Kit Reliance sub panel with 50A inlet, plus outlet box and cables · 50A · BLUETTI Apex 300 (single unit, or a parallel version for two) · Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say) The house hookup for a BLUETTI Apex 300 4.0	Reliance sub panel with 50A inlet, plus outlet box and cables	—	50A	BLUETTI Apex 300 (single unit, or a parallel version for two)	Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say)	$699 at BLUETTI Checked Nov 9 In stockCheck price →
Our verdict Our verdictResearched BLUETTI's kit for connecting an Apex 300 to chosen house circuits: a Reliance sub panel with a 50 A inlet, a 50 A outlet box and the cables, in single or parallel versions. Have a qualified electrician install it. Best for The house hookup for a BLUETTI Apex 300 Good Made for the Apex 300 Reliance parts Single and parallel versions Worth knowing Manual switchover Circuit count not stated Who shouldn't buy it: Don't buy it if you don't own an Apex 300.
5. EcoFlow Smart Gateway (200A) Whole-home automatic transfer gateway (under 20 ms) · 6 controlled, plus a backup sub-panel · 200A, 120/240V · DELTA Pro Ultra X; DELTA Pro Ultra. Not DELTA Pro 3 · EcoFlow-authorized installer who is a licensed electrician (EcoFlow) Whole-home switchover for less panel than the SHP3 4.0	Whole-home automatic transfer gateway (under 20 ms)	6 controlled, plus a backup sub-panel	200A, 120/240V	DELTA Pro Ultra X; DELTA Pro Ultra. Not DELTA Pro 3	EcoFlow-authorized installer who is a licensed electrician (EcoFlow)	$2,199 at Amazon as of Nov 9, 2026, 11:40 AM ET · Details Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. In stockCheck price →
Our verdict Our verdictResearched A 200 A automatic gateway that switches the house to a DELTA Pro Ultra X or DELTA Pro Ultra in under 20 ms, with six circuits you can control from the app and the rest fed through a backup sub-panel. EcoFlow says it must be installed by its authorized installers, who are licensed electricians. Best for Whole-home switchover for less panel than the SHP3 Good 200 A whole-home switchover 6 app-controlled circuits 10-year warranty Worth knowing Only six circuits are individually controlled Only works with EcoFlow's DELTA Pro Ultra and Ultra X Who shouldn't buy it: Don't buy it if you want to control every circuit from the app: that's the Smart Home Panel 3.
6. Anker SOLIX Smart Inlet Box (Manual Backup for E10) Best manual switch or kit Manual inlet box for the E10 · Feeds your backup sub-panel (count not stated) · 100A continuous, 120/240V · Anker SOLIX E10 · Qualified personnel (Anker's guide); a licensed electrician may need the utility to remove the meter seal The lower-cost way to hook up an E10 4.0	Manual inlet box for the E10	Feeds your backup sub-panel (count not stated)	100A continuous, 120/240V	Anker SOLIX E10	Qualified personnel (Anker's guide); a licensed electrician may need the utility to remove the meter seal	$399.17 at Amazon as of Nov 9, 2026, 11:40 AM ET · Details Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. In stockCheck price →
Our verdict Our verdictResearched The manual alternative to Anker's Power Dock: a 100 A, 120/240V inlet box that connects an E10 to your backup circuits, which you switch over by hand in an outage. Anker's guide says installation must be by qualified personnel only. Best for The lower-cost way to hook up an E10 Good 100 A at 120/240V Outdoor NEMA 3R box 10-year warranty Worth knowing Manual: no automatic switchover Works only with the E10 Who shouldn't buy it: Don't buy it if you want the house to switch to battery on its own: that's the Power Dock.
7. Goal Zero Yeti Home Integration Kit (4-Circuit Transfer Switch) Manual transfer switch (Reliance Pro/Tran 2) · 4 · 15A at 120V (1,875 W) · Goal Zero Yeti 1000X and up (Yeti X and Yeti Lithium, 1,000 W and up) · Qualified licensed electrician, required by Goal Zero; indoor breaker panels only Four circuits from a Goal Zero Yeti 4.0	Manual transfer switch (Reliance Pro/Tran 2)	4	15A at 120V (1,875 W)	Goal Zero Yeti 1000X and up (Yeti X and Yeti Lithium, 1,000 W and up)	Qualified licensed electrician, required by Goal Zero; indoor breaker panels only	$449.95 at Amazon as of Nov 9, 2026, 11:40 AM ET · Details Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. In stockCheck price →
Our verdict Our verdictResearched A Reliance 4-circuit, 15 A manual transfer switch with a 10 ft cable, made for Goal Zero's Yeti 1000X and larger. Goal Zero says it requires installation by a qualified licensed electrician and works only with indoor breaker panels. Best for Four circuits from a Goal Zero Yeti Good Four circuits, 15 A at 120V Reliance switch, UL listed Cable included Worth knowing 1,875 W limit 2-year warranty Who shouldn't buy it: Don't buy it if you have a Yeti PRO 4000: Goal Zero's Haven 10 is made for it.
8. Goal Zero Haven 10 Manual Transfer Switch Manual transfer switch; under 10 ms to the Yeti PRO · Up to 10 (120V) · 120V circuits (amp rating not read) · Goal Zero Yeti PRO 4000 · Professional installation (Goal Zero: "This system must be professionally installed") Ten circuits for the Yeti PRO 4000 4.0	Manual transfer switch; under 10 ms to the Yeti PRO	Up to 10 (120V)	120V circuits (amp rating not read)	Goal Zero Yeti PRO 4000	Professional installation (Goal Zero: "This system must be professionally installed")	Check price →
Our verdict Our verdictResearched Goal Zero's transfer switch for its Yeti PRO 4000: it backs up as many as ten 120V circuits and, Goal Zero says, switches to the Yeti PRO in under ten milliseconds. Goal Zero says the system must be professionally installed. Best for Ten circuits for the Yeti PRO 4000 Good Up to ten 120V circuits Under 10 ms switchover (maker) Made for the Yeti PRO 4000 Worth knowing 120V circuits only Not in our Amazon results (as of Nov 9, 2026): search link Who shouldn't buy it: Don't buy it if your Yeti is a 1000X to 6000X: the Yeti Home Integration Kit is the match.
9. Jackery Manual Transfer Switch (120V 30A) Pre-wired manual transfer switch with L5-30 inlet and wattmeters · 30A, 120V · Jackery Explorer 2000 Plus and HomePower 3600 Plus · Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say) The house hookup for one HomePower 3600 Plus 4.0	Pre-wired manual transfer switch with L5-30 inlet and wattmeters	—	30A, 120V	Jackery Explorer 2000 Plus and HomePower 3600 Plus	Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say)	Check price →
Our verdict Our verdictResearched Jackery's pre-wired 120V, 30 A manual switch with an L5-30 inlet and wattmeters, for the HomePower 3600 Plus and Explorer 2000 Plus. In an outage you flip the circuits you want over to the battery by hand. Have a qualified electrician install it. Best for The house hookup for one HomePower 3600 Plus Good Matched to the 3600 Plus Pre-wired with wattmeters L5-30 inlet included Worth knowing 120V only Indoor-only metal cabinet Who shouldn't buy it: Don't buy it if you want automatic switchover: that needs a 5000 Plus or 3600 Pro Max with the Smart Transfer Switch.
10. Jackery Manual Transfer Switch (240V 50A) Manual transfer switch · 50A, 240V · Explorer 5000 Plus; two HomePower 3600 Plus or two Explorer 2000 Plus with Jackery's parallel combiner · Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say) 240V circuits from a 5000 Plus, by hand 4.0	Manual transfer switch	—	50A, 240V	Explorer 5000 Plus; two HomePower 3600 Plus or two Explorer 2000 Plus with Jackery's parallel combiner	Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say)	Check price →
Our verdict Our verdictResearched Jackery's 50 A, 240V manual switch, for the Explorer 5000 Plus, or two HomePower 3600 Plus units joined with Jackery's parallel combiner. It lets 240V circuits such as a well pump run on battery. Have a qualified electrician install it. Best for 240V circuits from a 5000 Plus, by hand Good 240V circuits 50 A rating Matched to the Explorer 5000 Plus Worth knowing Manual switchover Circuit count not stated Who shouldn't buy it: Don't buy it if you'd rather the house switch itself: that's the Smart Transfer Switch.
11. BLUETTI AC500 Home Integration Kit (120V, one AC500) Reliance sub panel with 50A inlet, plus outlet box and charging cable · 50A, 120V · One BLUETTI AC500 with B300S batteries · Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say) For AC500 owners: 120V circuits 3.5	Reliance sub panel with 50A inlet, plus outlet box and charging cable	—	50A, 120V	One BLUETTI AC500 with B300S batteries	Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say)	$619 at Amazon as of Nov 9, 2026, 11:40 AM ET · Details Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. In stockCheck price →$699 at BLUETTI →BLUETTI price checked Nov 9
Our verdict Our verdictResearched BLUETTI's kit for connecting one AC500 to house circuits: a Reliance sub panel with a 50 A inlet, an outlet box and a 50 A charging cable. It's for people who already own an AC500, which BLUETTI's US store no longer has available. Have a qualified electrician install it. Best for For AC500 owners: 120V circuits Good Reliance parts Sold on Amazon and by BLUETTI Charging cable included Worth knowing The AC500 itself is no longer available from BLUETTI 120V only Who shouldn't buy it: Don't buy it if you don't already own an AC500.
12. BLUETTI AC500 Home Integration Kit (120V/240V, two AC500s) Reliance sub panel with 50A inlet, plus split-phase cables · 50A, 120/240V split-phase · Two BLUETTI AC500s with at least two B300S batteries · Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say) For owners of two AC500s: 240V circuits 3.5	Reliance sub panel with 50A inlet, plus split-phase cables	—	50A, 120/240V split-phase	Two BLUETTI AC500s with at least two B300S batteries	Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say)	$659 at Amazon as of Nov 9, 2026, 11:40 AM ET · Details Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. In stockCheck price →$709 at BLUETTI →BLUETTI price checked Nov 9
Our verdict Our verdictResearched The split-phase version: it joins two AC500s for 120V and 240V house circuits through a Reliance sub panel with a 50 A inlet. Only for people who already own two AC500s, which BLUETTI's US store no longer has available. Have a qualified electrician install it. Best for For owners of two AC500s: 240V circuits Good 120V and 240V circuits Reliance parts Sold on Amazon and by BLUETTI Worth knowing Needs two AC500s, no longer available from BLUETTI Circuit count not stated Who shouldn't buy it: Don't buy it if you don't already own two AC500s.
13. BLUETTI EP500Pro Home Integration Kit (120V & 240V, two EP500Pro) Reliance sub panel with 30A inlet, plus split-phase cables · 30A, 120/240V split-phase · Two BLUETTI EP500Pro · Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say) For owners of two EP500Pro: 240V circuits 3.5	Reliance sub panel with 30A inlet, plus split-phase cables	—	30A, 120/240V split-phase	Two BLUETTI EP500Pro	Qualified electrician (OSHA's rule for transfer switches; the maker's page doesn't say)	$659 at BLUETTI Checked Nov 9 In stockCheck price →
Our verdict Our verdictResearched BLUETTI's kit for joining two EP500Pro units to 120V and 240V house circuits through a Reliance sub panel with a 30 A inlet, with the split-phase and communication cables. Have a qualified electrician install it. Best for For owners of two EP500Pro: 240V circuits Good 120V and 240V circuits Reliance parts Cables included Worth knowing Needs two EP500Pro 30 A rating Who shouldn't buy it: Don't buy it if you don't own two EP500Pro units.
14. briidea Home Integration Transfer Switch Kit (15A, 120V, 4-Circuit) Pre-wired manual transfer switch with 10 ft cord · 4 · 15A, 120V · Any power station or generator with a 15A 120V outlet (briidea names BLUETTI, Yeti and generator brands) · Qualified electrician (OSHA's rule for transfer switches; briidea only recommends one) A brand-neutral 4-circuit switch for any power station 3.5	Pre-wired manual transfer switch with 10 ft cord	4	15A, 120V	Any power station or generator with a 15A 120V outlet (briidea names BLUETTI, Yeti and generator brands)	Qualified electrician (OSHA's rule for transfer switches; briidea only recommends one)	$151.99 at Amazon as of Nov 9, 2026, 11:40 AM ET · Details Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. In stockCheck price →
Our verdict Our verdictResearched A pre-wired 4-circuit, 15 A manual switch with a 10 ft cord that works from any power station or generator with a standard 15 A outlet. briidea only recommends an electrician; OSHA's rule for connecting a generator to a building is a qualified electrician with a properly installed transfer switch, and we'd treat a battery the same way. Best for A brand-neutral 4-circuit switch for any power station Good Not tied to one brand Four circuits Cord included Worth knowing 15 A, 120V only (about 1,800 W) Manual switchover Who shouldn't buy it: Don't buy it if your battery's maker sells a matched switch: use that one.

ⓘ As an Amazon Associate, PreparedStates earns from qualifying purchases. We may earn a commission when you buy through our links. When two products are close, commission can decide which one we pick. A clearly better product always wins. Amazon prices come from Amazon's own product data and can change at any time.

The honest bit

You may not need one. If an outage means running the fridge, a lamp, the router and phone chargers, plug them into the power station with heavy-duty cords. A panel or switch earns its cost when you need hard-wired loads like a furnace fan or well pump, or several rooms at once. It's a job for a qualified electrician, and many areas need a permit, so budget for the installation as well as the hardware.

Before you buy

Start with your battery.

EcoFlow's Smart Home Panel 3 and Smart Gateway work only with the DELTA Pro Ultra and Ultra X (its Smart Home Panel 10 is for the TITAN), Anker's Power Dock and Smart Inlet Box only with the E10, and Jackery's Smart Transfer Switch only with the Explorer 5000 Plus and HomePower 3600 Pro Max.

Automatic or manual.

Smart panels and automatic switches move the house to battery in about 20 ms, so clocks and computers may not even notice. A manual switch means flipping circuits over by hand when the power goes out.

Count your circuits.

List what must run (fridge, furnace, well pump, sump pump, a bedroom outlet for a CPAP, the router, some lights) and check the switch has enough circuits, and 240V circuits if you need them.

Match the rating.

A 15 A, 120V switch handles about 1,800 W; 30 A and 50 A switches carry more, and only a 120/240V switch can run 240V loads.

Have it installed properly.

OSHA: never attach a generator directly to a building's electrical system "unless a qualified electrician has properly installed the generator with a transfer switch." Several makers say the same: EcoFlow requires its authorized installers, who are licensed electricians; Anker, qualified professionals; Jackery, professional electricians for its Smart Transfer Switch; and Goal Zero, a qualified licensed electrician or professional installation.

How we choose

We verify every product's specifications against at least two independent sources, re-check its US price and stock on a schedule where we can track it automatically, and cross-check safety-relevant claims against official guidance. Every review is labeled Researched or Used and reviewed by us: where we've bought a product, or been sent it free, and used it ourselves, its review says which; where we haven't, our verdict is a considered spec-and-evidence comparison, not a hands-on test. When two products are close, commission can decide which one we pick. A clearly better product always wins. Read our full methodology →

Related gear comparisons

Whole-home battery backup compared →Home backup batteries compared →Generator transfer switches compared →Solar generators compared →

Guides that go with this

How long will a home battery backup power a house during an outage?

How long a home battery backup runs a typical US house, or just the essentials, in an outage: worked from EIA …

Read the guide →

Can a power station run a gas furnace? Blower watts, the transfer switch and the electrician

A gas furnace needs 120V for its blower and controls. What it draws, how long a 1,000 or 2,000 Wh station runs…

Read the guide →

Portable generator safety: where to run it, carbon monoxide and cords

How to use a portable generator safely in an outage: 20 feet from windows, never in a garage, CO alarms, outdo…

Read the guide →

Common questions

Can I plug a power station into a wall outlet to power the house?

No. The Consumer Product Safety Commission warns, about generators, never to power house wiring by plugging into a wall outlet, "a practice known as 'backfeeding.'" CPSC: "This is extremely dangerous and presents an electrocution risk to utility workers and neighbors served by the same utility transformer." A battery is no different. A transfer switch or panel prevents it.

Do I need a permit?

Often. Rules vary by city and county; your electrician will know. EcoFlow, for example, counts its installation time from when the permit is issued.

Will a generator transfer switch work with a power station?

Some do, if the station has a matching outlet (a 30 A L14-30 or 50 A 14-50 for 240V) and enough output. The makers' own switches are matched to their stations; a third-party switch should be checked by your electrician.

What's the difference between a smart panel and a transfer switch?

A transfer switch moves chosen circuits between grid and battery. A smart panel does that and lets you switch and monitor each circuit from an app, so you can shed loads to make the battery last.

Sources (2)