Jackery Explorer 1000 v2 vs BLUETTI Elite 100 V2: which is better for a power outage?
By PreparedStates editors · Checked October 22, 2026 · Researched from the makers' specs, not hands-on tested
These two are near twins on capacity, about 1 kWh of LiFePO4 each, so the choice rests on output, charging and warranty. BLUETTI lists 1,800 W, 80% in 45 minutes in Turbo mode (about 2 hours in its default Standard mode), up to 1,000 W of solar input and a 5-year warranty. Jackery lists 1,500 W but a slightly larger battery and a lighter case. Sourced from maker documents, not from any testing.
Choose the Jackery Explorer 1000 v2 if you want a little more stored energy and the lighter case, with loads that fit within 1,500 W.
See price on Amazon →Read our full review →Choose the BLUETTI Elite 100 V2 if you want 1,800 W of output, fast Turbo charging, up to 1,000 W of solar input and a 5-year warranty.
$499.00 at BLUETTI · checked Oct 22, 2026See price at BLUETTI →As an Amazon Associate, PreparedStates earns from qualifying purchases. We may earn a commission when you buy through our links. It never changes what we recommend. Amazon prices come from Amazon's own product data and can change at any time.
Specs side by side
Specs as each maker states them.
The key differences at a glance
Jackery lists 1,070 Wh and BLUETTI lists 1,024 Wh, both LiFePO4. BLUETTI rates continuous AC output at 1,800 W against Jackery's 1,500 W, and its manual puts UPS switchover within 10 ms where Jackery says under 20 milliseconds. Jackery is lighter on paper at around 23.8 lb, against 25.3 lb in BLUETTI's manual. BLUETTI gives a 5-year warranty; Jackery gives 3 years plus 2 after registration. Our power station comparison shows where both sit.
Output and peak ratings
Jackery gives three AC outlets and a 3,000 W peak rating. BLUETTI lists 11 output ports, and its manual describes an optional Power Lifting mode, off by default, for pure resistive heating loads such as kettles and electric blankets, up to 2,700 W, though actual output stays at 1,800 W. Plan around the continuous ratings and treat peak figures as short allowances.
Charging speed and solar
BLUETTI's 45-minute claim is for Turbo mode, which is set on the display. Its manual says the unit charges in Standard mode by default, at a 600 W maximum and about 2 hours. In Turbo mode the solar input rises to 1,000 W. Jackery's Emergency Super Charge claim is 0 to 100% in 1 hour, enabled in the Jackery app, and the manual calls it a when-necessary option, not a regular one. Jackery lists 1.58 hours on its AC adapter, and its DC input is capped at 400 W.
Weight, size, noise and temperature
Jackery lists 12.87 by 8.82 by 9.72 in; BLUETTI lists 12.6 by 8.5 by 9.8 in, so they are close in size. Jackery quotes 30 dB without stating a load. BLUETTI's page quotes 30 dB under 600 W, while its manual lists noise as 50 dB maximum. For cold weather, BLUETTI lists discharging down to -4°F against Jackery's 14°F, but Jackery's listed range runs higher, to 113°F against 104°F. Jackery's manual says indoor use only, and BLUETTI says its unit is not waterproof.
UPS claims and medical devices
BLUETTI's page markets the 10 ms switchover for medical devices, servers and other sensitive equipment, and mentions CPAP machines. Its manual, though, says the UPS is not for devices such as data servers or workstations that need a high-performance UPS. Jackery's own FAQ advises against pairing its power stations with medical devices, life-support equipment or data servers, and its manual says its switchover is not 0 ms. Ask your doctor and the device maker before relying on either, and read medical devices in a power outage.
Which to choose
Choose the Jackery if you want slightly more stored energy and the lighter case, and your loads stay within 1,500 W. Choose the BLUETTI if you want more output, faster charging in Turbo mode, more solar headroom and a 5-year warranty. BLUETTI's FAQ also says B80 batteries can expand it in Power Bank Mode, which its manual does not cover. The Jackery review covers the Explorer 1000 v2 in more detail.
Choose the Jackery Explorer 1000 v2 if you want a little more stored energy and the lighter case, with loads that fit within 1,500 W.
Choose the BLUETTI Elite 100 V2 if you want 1,800 W of output, fast Turbo charging, up to 1,000 W of solar input and a 5-year warranty.
Common questions
Which recharges faster, the Jackery 1000 v2 or the Elite 100 V2?
On the makers' numbers they are close once each fast mode is on: 80% in 45 minutes in BLUETTI's Turbo mode, against 0 to 100% in 1 hour in Jackery's Emergency Super Charge. BLUETTI's default Standard mode takes about 2 hours, against 1.58 hours on Jackery's AC adapter.
Which battery is rated for more cycles?
BLUETTI rates its cells at 4,000 or more cycles to 80% of original capacity. Jackery rates its cells at 4,000 cycles to 70% or more. The end points differ, so BLUETTI's is the stricter rating, though both are the makers' own ratings.
Is the BLUETTI Elite 100 V2 waterproof?
No. BLUETTI's FAQ says it is not waterproof, and to keep it in a dry, well-ventilated place and not lay it on its side. Jackery's manual goes further and marks its unit indoor use only, so keep either one dry.
How should I store each one between outages?
BLUETTI's manual says to charge to 40% to 60% before storage, power off, disconnect all cables and fully cycle the unit every 3 months. Jackery's manual warns that storing a depleted unit for 3 to 6 months degrades performance.